Features

Fabtec Air handling units are available in standard 25mm casing construction as well as 50mm type as option.

The design of the Air Handling Unit is based on the use of standardised panels and modular panels.

The casing is standard complete double skin.

All inner panels are of galvanized steel sheet.

The standard unit options are shown here for your reference

1. Choice of Blower

There are three types of DIDW centrifugal fans available:

a.  Forward curved for all model sizes.

b.  Backward inclined for all model sizes.

c.  Airfoil for all model sizes except some sizes.

2. Anti-Vibration

As standard from the factory, the fan and motor assembly are mounted on a common base with internally mounted spring isolators which saves on site installation cost.

3. Square Flanged Outlet (Forward Curved & Backward Inclined)

All fan sections are supplied with a single square flanged outlet to provide easy duct connection. Airfoil fan shall be equipped with rectangular flanged outlet.

4. Cooling Coil & Condensate Pan

The cooling coil and condensate pan is a single assembly mounted on slides to facilitate easy maintenance.

5. Drift Eliminators

Drift eliminators are offered as a factory-supplied option for application where the face velocity exceeds 2.5 m/s.

6. Double Skinned Panels

All panels have double skinned construction internally insulated with Polyurethane Foam, on floor panels to gain  access into the Air Handling Unit without damaging the insulation.

7. Plastic Coated Panels & Frames

All external frames are painted with durable oven cured epoxy based powder paint and the panels are plastic coated.

8. Lifting Cum Joining Bracket

Air Handling Units are supplied with lifting/assembly lugs located to suit optimum hoisting stability and sectional joints.

9. Insulation

The panels and frames are thermally insulated : Panels, frames and floor panels with or rigid Polyurethane foam.

10. Filters

Factory supplied and installed filters are available.

11. Dampers

Mixing boxes are equipped with parallel bladed and are interconnected from  outside with return air dampers.

Some Of Our Conventional Offerings